It is a very difficult job to remove large area signage from windows. Even with a Triumph Scraper which I consider the very best. The I use a six inch and the blade is very flexible. This is important because most window glass is somewhat concave.
In approaching the job you will want to clean the window first. Then apply one of the best products out there to soften and "move through" the vinyl to the opposite side. Once wet leave the chemical there for between fifteen to twenty minutes. Then start an edge and pull with you hands. Use thin rubber gloves to keep your hands away from the chemical/product. Pull VERY SLOW! You will notice that even very old vinyl will become flexible from the chemical. If it tears just start again and keep on pulling. If you have high windows to do get a ladder that will bring you right up to the sign. That way you will not have to rip off one inch strips with your pole.
If you do not use a chemical/product the vinyl will break off in small pieces and will take much longer to get it all off. I just did a job today and was able to actually peal off an entire six square feet at once in about three minutes. I could see where the chemical had soften the vinyl enough so it "rippled" but still remained intact. That is the goal. Because every time you have to start pealing again it takes more time. Pricing should be by the square foot always.
I am currently collecting the names of products and chemicals to do this type of work, and am making that available to anyone who is a member of IGSA. IGSA membership is very easy to acquire. First it is free. Next you must read this blog. Which is the only way you will get the information that will give you the edge over your competition where you live. There is no other way. BUT You will need to send an email to me so I can put you on my email list to send you the names of all the products and chemicals that are being referenced here. Along with the companies that are selling them.
So it is up to you. Send me your email and get on the IGSA email list.
Henry Grover Jr.
Glass Smart
No comments:
Post a Comment